Smart+ Everywhere Light

The Smart+ Everywhere Light works with a Smart+ Sensor which is used to trigger and control the light. And each light needs to pair with a Smart+ sensor.

Traditional motion lights can sometimes lack the smarts to adapt to all the unique home lighting situations. To tackle that, we've created 3 different types of sensors. These smart cookies react to body movements, hand waves, and even door movements to automate your home lighting.

Not only that, but we've also packed in some bonus features for typical scenarios. For example, our Smart+ Hand Sensor comes with a timer that keeps your kitchen lit for longer.

By pairing multiple lights to a single sensor, you can command your lighting installations all at the same time.

The Smart+ Sensor is like the wizard commanding the Smart+ Everywhere Light. So don't forget to add it to your cart at checkout.

Hand Sensor: A simple hand wave brings light, and it stays lit until you wave again. Like a regular switch – even with messy hands!

Motion Sensor: Instantly lights up on detecting movement within 66ft (20m); when no motion is detected, it will gently dim after the duration you have set.

Door Sensor: Open the door and the light instantly illuminates; close it, and the light automatically shuts off.

The light and Smart+ Sensor are sold individually. It's a bit like picking your favorite duo in a game – the sensor's needed for the lights to shine bright, but this gives you the freedom to set up your lighting just the way you like it at home!

---This is going to be a long answer---

We've heard the feedback about the battery life of other products. Here is how we address the concerns with our new Smart+ Everywhere Light:

1. We increased the battery capacity.
Unlike other models, which had a maximum battery capacity of around 800mAh (and many of these were falsely labeled), our lights have a minimum battery capacity of 2250mAh, even for the shortest length. As the length increases, the battery capacity also increases, reaching up to 4500mAh for the longest one – at least three times longer than typical products.

2. We make every bit of power more effective.
Previously, motion sensor lights could only be activated through human motion detection, leading to many false triggers and thus wasting a lot of battery. With already limited battery life, these false triggers significantly reduced usage time.

Firstly, we've introduced three different types of sensors: Motion Sensor, Hand Sensor, and Door Sensor. You can choose the appropriate sensor to trigger the light according to your specific needs, reducing false activations and saving battery.

Secondly, each sensor not only has a different triggering mechanism but also operates differently, maximizing battery usage. For example, the Motion Sensor automatically turns on when someone approaches and turns off when they leave, ideal for hallways, staircases, and nighttime bathroom trips. The Hand Sensor stays on continuously after a hand gesture until another gesture turns it off, perfect for scenarios requiring sustained light, like kitchens and display cabinets. The Door Sensor lights up when a door is opened and turns off when closed, suitable for closets and storage cabinets.

Thirdly, by separating the sensor from the light itself, we've also gained more space to add features. Besides the common adjustments of brightness and color temperature, the Hand Sensor now includes a timer function, and the Motion Sensor allows for adjusting the sensing mode and the duration of the light when triggered. These are functionalities our past products couldn't offer.

Pro Tip: You can even keep it lit 24/7 - Just like your everyday lights.
Not just strong battery life - our lights level-up with a PowerGlow feature and you can forget about charging! You can connect your lights together and power them with just one USB cable.

We hope these improvements address your concerns about battery life. And we're confident that the Smart+ Everywhere Lights will meet and exceed your expectations.

Absolutely! Each Smart+ Sensor can control and adjust all its paired lights, including setting color temperature and brightness levels.

Moreover, if you're using the Motion Sensor, you can decide how long it stays on after detecting motion – choose from a quick 30 seconds, a full minute, or a leisurely 2 minutes.

And our Hand Sensor comes with a handy timer function, which you can set to 10, 20, or 30 minutes. No more accidentally leaving the lights on and wasting battery life.

Plus, you can set the continuous lighting mode on all 3 sensors. Each of them has both auto mode and always-on mode.

One sensor can pair with multiple lights that are within 66ft / 20m. And if it's for everyday household use, you can basically connect as many lights as you want.

We tried connecting over a hundred lights, and they still worked fine. However, this is only for lab testing, it is not recommended to use it like this normally.

Yes. You can connect your lights together and power them with just one USB cable. Feel free to either charge the lights in this linked manner or keep them plugged into the power source for continuous illumination.

To get the best charging performance for each light, it's better not to connect more than 5 x 10"/25cm lights, 4 x 15"/37cm lights, or 3 x 19"/49cm lights.

Each light can only be paired with one sensor at a time. You can pick from a Door Sensor, a Hand Sensor, or a Motion Sensor — choose one that best fits your needs. If you want to switch up the sensor, you'll have to disconnect the previous sensor and start a new pairing.

Absolutely! These lights attach securely using magnets. Here's a simple guide to ensure they stick well:

• First, clean the surface where you'll mount the light with a cloth.
• Next, stick the metal plates to the marked areas on the back of the light. Press them onto the surface and hold for a few seconds.
• Remove the light, press down on the metal plates again for a few seconds, and then wait for 2 hours before reattaching the light.

This way, you'll get a strong and reliable hold!

Once you place your order, we'll pick & pack it within 48 hours (business days).

Estimated delivery times (after it ships):

• North America — US: 6–10 business days (5–8 expedited), Canada: 8–12
• Oceania — Australia / New Zealand: 10–12
• Europe — UK: 5–8 (3–5 expedited), Most EU: 6–10 (5–8 expedited), Some countries: 7–12
• Asia — SG / MY: 3–6, HK / TW: 3–4, JP / TH / VN / PH: 5–8

The moment it ships, we'll email you a tracking number so you can keep an eye on it. If you're ever unsure, just reach out — we're happy to check your shipment for you.

We proudly offer a 30-day money-back guarantee and a 1-year warranty. So, go ahead and give it a try without any worries!