Skip the wiring, get straight to the glow.
Our all-in-one PowerControl Hub powers your strip, puts color & brightness at your fingertips, and sync effortlessly with Smart+ Sensors.
The Only Lightstrip That Actually Looks Finished.

The Hand Sensor Smart+ opens access to complete smart+ light capabilities.


Unlock complete smart+ light capabilities with the Smart+ Door Sensor as your gateway.
Smooth, seamless glow. Not a single dot in sight.
Their strips show every LED — dotted, uneven, and unfinished.
We've been here 7 years. 1M+ lights. 15 iterations.
They showed up last season from nowhere.
Independent Review
"Of everything we tested, there is one clear product to rule them all. They're not gimmicky. They're just good."
They look similar. They're not.
No 97 CRI. No 1,000 lumens/m. No IP44 rating. No color temp control.
One sensor. Every Smart+ light responds.
Their lights can't connect to our Smart+ sensors — or to each other.
⚡ LIMITED STOCK AVAILABLE
16.4ft kits selling fastest this month
30-Day Risk-Free Trial
Try it for 30 days. Full refund if it's not for you.
Next-gen COB, not old SMD 💡 Built with 680 COB LEDs per meter and a textured silicone diffuser. That's why it looks smooth and finished — not dotted and cheap.
Higher-grade components throughout 🧪 Better LEDs, better power hub, better adhesive — for stronger output and more stable performance.
Already in 1,000,000+ homes 🏠 Households, makers, designers — they've been using Smart+ for years. It just works, without the complicated setup.
Refined across multiple design updates 🔧 Every version gets better based on what real customers tell us. No shortcuts, no gimmicks.
Great lighting should feel like a safe upgrade, not a risky buy. Try it at home and see how it fits your space. If it's not right for you, you're covered.
Step 1 — Peel and stick 🧷 Nano Adhesive Clips hold it in place — no wiring, no drilling. Drill clips included for tricky spots.
Step 2 — Plug in and set the vibe ✨ PowerControl Hub adjusts brightness, color temp (2700–6500K), and switches between always-on, breathing, and music-sync modes.
Step 3 — Connect a sensor 📡 Pair with a Smart+ sensor for motion, door, or hand gesture activation.
📏 Need a custom length? Trim to length in 1.2" (3cm) increments, or snap on extensions up to 32.8 ft (10m) total.
💡 Pro Tip In the Smart+ system, one sensor can trigger several compatible lights together. Set up different zones for different rooms.
Built for the "this corner could look so much nicer" spots — especially where you want a smooth, seamless glow.
We ship to most international countries. 🌍
Shipping time We pick & pack within 48 hours and ship with trusted delivery partners so your package arrives safely. 📦
You'll get a shipping confirmation email with a tracking number once it ships. 🔎
Returns 100% Satisfaction Guaranteed. We welcome returns within 30 days of receipt for a refund, making your experience hassle-free.
"If everyone starts using these at home, electricians will be twiddling their thumbs."
"If you skip smart home lighting because it feels complex, Smart+ will change your mind."
"Now we can't live without Smart+ Dream Team in every corner of our home."
Those cheap strip lights? They’re dim, dotted, and leave your space looking like a bad motel hallway. With Next-Gen COB Technology and a textured silicone sleeve, it delivers ultra-bright, soft, even light that makes your kitchen countertops or hallways glow like a Pinterest dream.
“I’m not entirely sure what COB is… but it’s by far the brightest and smoothest LED that I own."
Sync your lights with Smart+ sensors for motion, hand-sweep, and door-activated control. Group lights by area to match your routine—whether you walk into a softly lit room, brighten the space with a wave, or have lights turn off as you close the door behind you.
“Thought smart lighting meant rewiring my house? Nope. I set it up in 10 minutes, and now all my lights sync perfectly.”
Use the PowerControl Hub to switch from a cozy 2700K dinner glow to a bright 4000K daylight tone for morning prep or hallway lighting. Need your entire space to match? Group your Smart+ lights for one-touch control across rooms.
“Can I just say WOW? They make my place feel like I hired a designer.”
No more one-size-fits-none. Choose from 3 lengths to match your space. Need extra? Snap on extensions for longer runs, or cut it shorter at 1.2’’ (3 cm) intervals with labeled cuttable positions. From cozy kitchen cabinets to expansive hallways, there’s complete coverage.
“I’m obsessed with how it turned out, and I can’t stop showing it off to everyone who visits!”
Choose Breathing Light for a gentle pulsing glow—perfect for yoga or meditation. Or turn on Music Syncing Mode, where the light dances to your playlist, transforming your living room into a party-ready space or setting the stage for an epic movie night.
“I use it for yoga, where it feels like the whole room breathes with me.”
1. Smart+ Pro COB Lightstrip
2. PowerControl Hub*
3. Power Cable*
4. Nano Adhesive Stickers
5. Nano Adhesive Clips & Drill Clips
*Only included in 3.28ft (1m) Kit, 6.56ft (2m) Kit, 16.4ft (5m) Kit
Length: 3.28 ft (1m) / 6.56 ft (2m) / 16.4ft (5m)
Signal Connection Distance: Within 66 ft (20 m)
Wattage: 10 W/m
Lumens: 1000 lm/m
Lamp Bead Density: 680 COB LEDs/m
CRI: 97
Color Temperature: 2700-6500K
Power Input: 100-240V AC, 50/60Hz
Water Resistance: IP44 (Lightstrip and extension connections*)
* The PowerControl Hub and power cable are not waterproof, so keep them dry.
How It Works:
One wave of your hand switches the light on, and it stays on until you wave once more. It works like an ordinary switch, even when your hands are messy.
Perfect for:
Bigger spaces such as under kitchen cabinets or display cabinets, where light is needed for longer.
Lighting Modes:
Auto - Hand-Sweeping Mode
Always On - Always-On Mode
Timer Function:
You can also have the lights switch off after 10 / 20 / 30 minutes.
Installation Tip:
Mount it somewhere your hands reach easily.
How It Works:
Turns on the moment it senses movement within 66ft (20m); once no motion is detected, it softly dims after the duration you chose.
Perfect for:
Hallway, Bathroom, Walk-in Closet, Stairway, and any spot that needs fast, efficient lighting.
Lighting Modes:
Auto 1 - Energy Motion Mode (activate in the dark only)
Auto 2 - All Day Motion Mode
Always On - Always-On Mode
Motion Duration:
Lights switch off on their own after 30 sec / 1 min / 2 mins with no movement.
Installation Tip:
Place it near the spot where you walk in. The sensor head angle is also adjustable to suit your needs.
How It Works:
As soon as the door opens the light comes on; when you close it, the light switches off automatically.
Perfect for:
Any closet, utility cabinet or snack cabinet that has a door; it installs easily next to the door.
Lighting Modes:
Auto - Door-Activated Mode
Always On - Always-On Mode
Installation Tip:
The sensor sits on the side of the device, so make sure the door covers it completely.
I installed the lightstrip in some wood panelling and it gives a really nice glow. The perfect ambiance, with the motion sensor lighting it up every time I approach the stairs.
Was this helpful? #8 #0
Highly recommend these lights are gorgeous, for the money you can’t beat it! The glow is where and indirect. You can place it anywhere, I have these mounted under my cabinets.
Was this helpful? #4 #3
My wife ordered these LED lights for our kitchen counter. They give us the light we need to prepare meals. The adhesive backing seems to stick well.
Was this helpful? #7 #1
Good lights that work very well for under our cabinets in the kitchen. Very simple to install. The lights cut with no problems.
Was this helpful? #2 #1
I'm pleased with the LED strip. My current use for these is to attach them to the back of my TV to provide ambient background light. They are easy to connect and worked well out of the box.
Was this helpful? #3 #3
They might look similar in pictures... but it’s all about the light quality.
1. A glow that’s actually beautiful.
Those other lightstrips often look cheap with uneven, dotted lighting. Ours doesn’t. Thanks to COB technology, you get a smooth, seamless, spotless glow.
2. Brighter and better.
With almost 10x more LEDs per meter, our lightstrip delivers brighter, more even lighting.
3. Syncs perfectly with your smart home.
Pair it with Smart+ sensors and your lights can sync up and turn on or off automatically.
4. Installation? Plug it in and stick it up.
No messy wiring, no drills, no stress.
Both the kit and extension include the lightstrip and all the installation accessories for the chosen length.
The key difference? The kit comes with a PowerControl Hub and Power Cable, while extensions connect to an existing setup.
Choose the Smart+ Sensor that fits your space and pair it with your light. Once paired, the sensor controls the connected light automatically.
You can extend the lightstrip by snapping on extensions. You can also trim it to fit your space perfectly.
It’s not about the number of extensions but the total length. You can extend the lightstrip up to 32.8 feet (10 meters).
Yep! The lightstrip itself is IP44-rated, so it’s totally fine with dust and the occasional splash. The PowerControl Hub and power cable aren’t waterproof and should stay dry.
Yes! This lightstrip is fully compatible with other Smart+ lights. When connected within the active range of a single sensor, all lights in the system will share the same activation and light settings.
Not at all! Our Smart+ lights are a breeze to set up. Simply choose a Smart+ Sensor, pair it with your light, and you’re ready to go.
With the PowerControl Hub, you can adjust the color temperature, tweak the brightness, and create the perfect vibe for any moment.
You can also switch between modes such as Breathing Light and Music Syncing Mode.
The light and Smart+ Sensor are sold individually. The sensor is needed for automatic sensor-controlled activation.
One sensor can pair with multiple Smart+ lights, including Everywhere Light, Halo Lux, and lightstrips connected via PowerControl Hubs, as long as they are within a 66ft / 20m range.
Each light can only be paired with one sensor at a time. You can choose a Door Sensor, Hand Sensor, or Motion Sensor. To switch sensors, disconnect the previous sensor and start a new pairing.
Once you place your order, we’ll pick & pack it within 48 hours (business days). Estimated delivery times begin after the order ships.